Adding Cheap And Classy Storage To Your Shop

If your garage is like mine, it’s a mess.

Periodically you spend a weekend cleaning up; cramming your tools and scraps each into their respective spots (or wherever they will fit), and sweeping up the sawdust and shavings, leaving your shop spotless… until you start your next project.

At that point you dislodge a tool and the materials necessary to complete your project, and you may has well have just pulled the pin on a grenade.

A short time later your garage explodes in a flurry of tools and shrapnel, that leaves your garage as bad as it has ever been, and quite possibly worse, while it waits for another free weekend to be cleaned up.

Making matters worse, I have many times promised to get the garage clean enough for my wife to park her car, but I have thus far been unable to maintain the upper hand for long enough to actually pull the car into its place.

After extensive study of this phenomenon, I started to study the root cause. Surely this is not merely a symptom of being a lazy slob. Surely this is not merely my own fault….

…surely…

Thus, having ruled out personal flaws, I decided that the heart of the problem was simple: Storage.

I had some wire shelves, a rolling toolbox, a workbench, a hanging shelf, and a pegboard, but every tool I owned and used was living in increasingly cramped quarters, and there were some obvious opportunities to add enough space to get a little more capacity and flexibility in the storage system.

The first and largest opportunity: my metal working station.
Untitled

Untitled

When I designed my metal working station, I left large openings with the intention of someday building drawers and shelves.

About a week ago I realized I was never going to find it worthwhile to spend a day building a bunch of drawers while I had a backlog of so many more important/interesting projects (swingset, porch lights, shed, small truck for my daughter, speargun, radius cutter for my lathe… and whatever else comes up between now and the finish of those).

What if I just bought some drawers?

At first I thought I thought I’d use a coupon to buy a couple Harbor Freight toolboxes, since they are so much cheaper than anything equivalent from Sears or Home Depot, but I’ would have still ended up spending a few hundred dollars.

What should I do?

Begin theme music! …Possibly after advertisement!

<Note: Please leave this playing while reading the remainder of this article>

Enter the Swedes, stage left!

IKEA TO THE RESCUE!

$40 KULLEN 3 Drawer Chest

$59 - Oh MICKE You're so fine!

Untitled

Untitled

Untitled

Untitled

Untitled

Granted, there’s still a lot of cleanup to do, but I have now added more than enough storage for all of my metal working tools and work pieces.

And at a total of $100, it costed me less than I would have spent on the plywood and drawer slides to make the drawers that I would have never taken the time to build.

Those clever Swedes.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s